%
O09999 (Spindle Warm-up CM-1 50K)
(This program should be run prior to) 
(machine use if machine has been idle) 
(for more than 4 days.) 
(Cycle time: 27-minutes.) 
(This program can be used for CM-1 50K spindles and may be used daily) 
(for spindle warm-up prior to high) 
(speed spindle use.)
S2500 M03 
G04 P200. 
S5000 M03 
G04 P200. 
S10000 M03 
G04 P200. 
S15000 M03 
G04 P200. 
S20000 M03 
G04 P200. 
S30000 M03 
G04 P200.
S40000 M03 
G04 P200.
S50000 M03 
G04 P200.   
M30 
%